Installation Chips on compatible Canon 055 / 055H
Step 1. To disassemble the OEM cartridge's chip
Tools Required:
Procedure:
1. Remove the empty OEM cartridge from the printer, place it backside up on a table, and locate the chip as shown by the red arrow.
2. Using pliers, cut the cartridge rib next to the chip.
3. Using tweezers, clamp the OEM chip and pull it out in the direction of the red arrow.
Step 2. Assemble the OEM cartridge's chip on the new printer.
Procedure:
1. As shown, place the chip diagonally into the chip slot in the correct direction.
2. Using tweezers, press the chip in the direction of the red arrow; after hearing the click, the chip is inserted into the slot.
3. If the chip middle line is aligned with the cartridge rib, the chip is installed correctly (as below picture).
4.If the chip middle line is aligned with the cartridge rib, the chip is installed correctly (as below picture).
Important Notices:
The printer will prompt as a result of the new cartridge being used in place of the OEM chip. "Continue prt (qlty not guaranteed)" ignore that prompt and use the cartridge normally.
The printing may be light than before because of using old OEM chip, you can adjust the color density by
operating the printer control pane
Click Menu ->
Function settings ->
Printer ->
Printer settings ->
Print Quality ->
Density -> + › Apply
Screen shots for that:
